Let's talk KRYLEX®

Benefits of High Glass Transition, ‘Tg’, Adhesives for Enhanced Reliability Electronic Device Assembly

KRYLEX High Tg Platform – KE9000 Series Introduction: The choice of which adhesive to select for a specific electronic application depends upon a number of different and specific requirements. Some properties are physical in nature e.g. Viscosity and thixotropic index, pot life, shelf life, etc. Other factors to consider in relation to the adhesive are […]

Posted by Andy Lard on April 3, 2026

High Performance, Dual Cure, ‘B Stage’ Adhesives for Electronic Device Assembly

Thermosetting adhesive systems are cross linked (cured) by a reaction with a designated stimulus. Adhesive curing is categorised into 3-stages: Adhesive B-Stage: B-stageable adhesive systems offer significant manufacturing advantages, including flexible processing, reduced waste, and improved precision. These types of adhesives are partially cured before final assembly, allowing for staged production and better control. There […]

Posted by Andy Lard on March 13, 2026

Stray Light Blocking Adhesive Technology for OLED Display’s

OLED (Organic Light Emitting Diode) displays have been a widely adopted Display Technology for the assembly of high-end consumer electronic devices for approximately the last 10 years. OLED displays have significant performance advantages over LCD (Liquid Crystal Display) technology. OLEDs use organic compounds that emit light when electricity is applied. Each pixel generates its own […]

Posted by Krylex on November 13, 2025

KURALOW Technology for Low Temperature Curing Applications

KRYLEX Product Technology Introduction: Consumer Electronic devices vary hugely in design and appearance depending on the specific manufacturer, the electronic device, and the specific model. Depending on the target use market, the manufacturer may select expensive or cheaper materials for the construction of the device. This diversity of specification and design means that a wide […]

Posted by Krylex on July 7, 2025

KRYLEX Electrically Conductive Adhesives for Electronic Device Assembly

As consumer electronic devices are required to run at ever-increasing power densities, the Increasing power usage presents several challenges. Two such applications that are seeing significant increases in power usage are Compact Camera modules (CCM) and high-resolution OLED Displays. These challenges require innovative solutions in power management, thermal design, and signal processing to ensure that […]

Posted by Krylex on July 7, 2025

KRYLEX KURA-LOW™ Technology Chemistry Platform Enabling Paradigm Shift for the Assembly of Consumer Electronic Devices.

Chemence Performance Materials research scientists are committed to solving next generation bonding challenges for Electronics Device Assembly. This corporate commitment to being a solution provider for the industry has led to the development of a new chemistry platform, KURA-LOW™ available in some KRYLEX adhesive formulations. Thermal budget is a critical concern when assembling electronic sensors, […]

Posted by Krylex on September 5, 2023

Wireless charging station for phone, earbuds and watch.

Adhesive Selection for Wireless Charging Technology

Wireless Charging is become an increasing important and common method for charging electronic devices across a wide variety of industrial segments. These segments include Aerospace, Defence, Healthcare, Industrial, Automotive and Consumer Electronics.  The advantages of a wireless approach compared to more standard charging approach via an attached cable are numerous. One of the obvious advantages […]

Posted by Krylex on December 16, 2022

Image showing white card with green solution in text set on a background of green grass and yellow flower.

Greener and Safer Adhesive Solutions

KRYLEX® More Environmentally Friendly & High Bio-content Adhesives: Consumer electronic device manufacturing companies constantly strive to deliver devices that enhance people’s lives through improved form and function.  In addition to an enhanced experience for the user, increasingly consumer electronic device manufacturers are also looking to deliver their products to the market in a way that […]

Posted by Krylex on October 26, 2022

High Performance UV Curable Liquid Adhesive Solutions for Bonding Flexible Printed Circuits (FPC)

Flexible Printed Circuits (FPC) are a common technology used in the assembly of portable and mobile electronic devices. The use of FPC’s have become widespread due to the ability to incorporate functional, reliable, electronic performance in a flexible substrate format. FPC’s are light and thin with excellent bending properties which can both save space and […]

Posted by Krylex on September 13, 2022

High Performance Adhesives for Bonding to Liquid Crystal Polymer (LCP) in The Assembly of Electronic Devices

Smaller, Lighter, Faster: The large consumer electronic device OEM’s are constantly striving to deliver higher device performance and functionality but also provide a robust product that is highly reliable. In addition there is a consumer requirement that electronic devices such as cell phones, watches etc… both look good and are comfortable to hold and use. […]

Posted by Krylex on September 13, 2022

Categories

Archive